Security Seals & Security Tags

Surface Mount Seals

A surface mount security seal or tamper evident label is typically used to span joints in materials and provide evidence if opened.
All the surface mount security seals shown below can be customised if required.

Pricing for security seals is shown for minimum quantities, substantial discounts apply for larger quantities, please contact us for details. Prices shown exclude VAT and delivery charges.

Type "KR" Universal Application Seal

Produced from red Mylar polyester material, which reveals clear security message and changes shade of colour if the seal is tampered with. For use on most smooth porous and non-porous surfaces. It is particularly suited to fibrous materials, envelopes, etc. When the seal is removed any residue of adhesive can be easily rubbed away or a replacement security label can be positioned over the residue.
Stock seals are supplied with sequential numbering and are available in two sizes, 85x25mm or 110x30mm.

Typical pricing for sequentially numbered Stock Seals (minimum quantity 500).

*** Substantial discounts apply for larger quantities. ***
*** Pricing for customised tamper evident seals available on request ***
Please contact us for details on pricing and to request samples.

Type "KNR" Universal "Non-residue" Seal

Produced from blue Mylar polyester material, which reveals clear security message if the seal is tampered with. Similar to Type KR in performance, but in most applications leaves no residue when removed. Suitable for many differing surfaces, however is not as effective as Type KR on paper or fibrous materials.
Stock seals are supplied with sequential numbering and are available in three sizes, 85x25mm, 110x30mm or 120x40mm.

Typical pricing for sequentially numbered Stock Seals (minimum quantity 500).

*** Substantial discounts apply for larger quantities. ***
*** Pricing for Customised Seals available on request ***
Please contact us for details on pricing and to request samples.

Type "KNDM" Secure Cargo Transit Seal

Tamper-Evident security seals for Road Transport and Air Cargo Security
to comply with Department for Transport (DfT) Single Direction on Cargo
(SDoC) - effective from 1st September 2009.

Features & Benefits

• “OPEN-VOID” message - Visual tamper-evidence

• Security cuts - Providing added tamper evidence

• Serial number with duplicate number tab - For accurate documentation records

• No residue - No cleaning required

• Deadened adhesive area - To aid authorised removal

• Can be customised with name & logo

• Water resistant (the surface must be clean, dry and grease free at the time of application)

Stock Seals sized 85 x 25 mm plus 10 x 25 mm duplicate number tab

Typical pricing for sequentially numbered Stock Seals (minimum quantity 500).

*** Substantial discounts apply for larger quantities. ***
*** Pricing for Customised Seals available on request ***
Please contact us for details on pricing and to request samples.

Type "MRP2" Multi Purpose Seal

Produced from ultra thin silver polyester foil with special high tack rubber based adhesive, incorporating either single, double or triple interlocking "petal" security cuts. This highly visible overt seal is suitable for porous or non-porous surfaces. It is particularly useful as a baggage seal and is used extensively on computers. Although the face material is very thin, it has a high tensile strength and any attempt at removal will result in the seal breaking around the security cuts, replacement or re-use is then not possible. Once the seal has been broken it can be removed without leaving any residue on the surface.

Typical pricing for sequentially numbered Stock Seals (minimum quantity 500).

*** Substantial discounts apply for larger quantities. ***
*** Pricing for Customised Seals available on request ***
Please contact us for details on pricing and to request samples.

Type 'C' Tamper Resistant Asset/Security labels - used as a seal

Although mainly used as an Asset/Security label self-adhesive ultra-destruct vinyl material is very suitable for use as a tamper evident seal on unmoving surfaces which would be opened once or only in exceptional circumstances.

Typical pricing (minimum quantity 500) single colour to include all artwork.

*** Substantial discounts apply for larger quantities. ***
Please contact us for details on pricing and to request samples.

Prices shown include all artwork but exclude VAT and delivery charges.

* Tamper Evident Seals * Security Seals * Tamper Evident Labels * Surface Mount Security Seals *

Last updated June 2011